MAGLOC®  Innovative accessories for Springfield XD Pistols
Magloc is a registered trademark of Smart Lock Technology Inc. in the United States Patent and Trademark Office since 1997, 
registration serial number: 75074255

Selected products can also be purchased from the following U.S. Dealer Brownells®, Inc.  Montezuma, IA

Products
(Click photo for more detail)
Description Price


XD Extended Slide Release for Springfield XD 9; 40 S&W & 45 acp cal pistols.
(Also fits XDm in 9; 40 S&W)
(Does not fit XDm in 45ACP)

 
Enlarge top contact area of original slide release by 118%

Improves Reloading Speed

First Released:  March 5, 2010

XD Extended Slide Release for Springfield XD 9; 40 S&W & 45 acp cal. pistols.
(Also fits XDm in 9; 40 S&W)

US $42.00

Does not fit XDm in 45 ACP
 



Solid Steel Guide Rod for Springfield XD & XDm pistols.
 
Add weight to front of pistol to reduce muzzle jump

Provides smooth cycling

Improves shooting speed and accuracy

Solid Stainless Steel Guide Rod for Springfield XD 5" Tactical
in 9mm & 40 S&W Cal.
Does not fit XDm
US $19.00

=========================
Solid Stainless Steel Guide Rod for Springfield XD 5" Tactical
in 45 ACP Cal.

US $20.00

Does not fit XDm

=========================

Solid Stainless Steel Guide Rod for Springfield XDM - 4.5 inch, 5.25 inch model in 9mm, 40S&W and 45ACP cal. pistols.  
US $20.00


Extended Magazine Release for Springfield XD Pistol
Enlarged release button contact area by 87%. 

Release button can be installed on both sides

Release button extended 0.099" (2.5mm) on both ends and fits most holsters

Fits all Springfield XD Models

No modification of the pistol is required

Extended Magazine Release
for Springfield
XDm Pistols in 9mm, .40 S&W & 45 ACPcal. (black color)
 

US$30.50
=========================

Extended Magazine Release
for Springfield XD Pistols in
9mm or .40 S&W cal.
(black color)
 US$30.50
Does not fit XDm pistols
 

=========================
For  XD,  in .45 ACP cal.
US$28.50 (steel color)
Does not fit XDm pistols
OUT OF STOCK

====================
(black color)  US$30.50
Does not fit XDm pistols

=========================

1/16" (1.5mm) pre-marked
Drive Pin - Springfield XD Pistol
US$2.00



Magloc® Grip tape for
A. Glock Pistols
B. Springfield XD pistols
C. SW99, Walther P99 & similar pistols

 

Provides traction on all sides of the handle.

Provides 60% to 80% more traction on the pistol (depends on the moisture condition).

Rubber texture, would not worn out clothing.

Made of 3 M Walk-Safe Material

Springfield XD US$11.50
 



Tactical Recoil Control Thumb Rest for Springfield XD Pistol

US Patented

Reduces muzzle jump by 70%

Prevents thumb from touching slide

Fits all Springfield XD Models

No modification required

http://www.hs2000talk.com

XD Tactical Recoil Control Thumb Rest - 9mm, 40 S&W
US$18.00
Does not fit XDm

=========================

XD Tactical Recoil Control Thumb Rest - 45 ACP
US$19.00

Does not fit XDm

=========================

GripPlus Memory Groove
US$4.50



EasyFit MagWell for
Springfield XD / HS 2000 Pistol
Improves reloading speed by 50%

Increases the existing magazine well opening by 45%

No modification required

XD .45 ACP EasyFit MagWell
US$29.50
Does not fit XDm, compact or sub-compact models

========================

XD 9mm, .40 S&W EasyFit MagWell
US$27.00


Does not fit XDm, compact or sub-compact models

Test Report
by James Nicholas
of XD-HS2000

Smartgun Conversion for 1911 A1 pistols

US Patent # 5,394,717;
5,758,524

The only smartgun conversion system available for semi-auto firearms in the world.

Works on magnetic force

Prevents unauthorized use of firearms

Activated with no time delay

1911 A1 Smartgun Conversion
US $95.00

**Magnetic Ring available in North or South magnetic pole.  Please indicate which magnetic pole your prefer and the circumference of your right hand middle finger when ordering.

Abstract of independent test by: R.K. CAMPBELL 
(S.W.A.T. Magazine, January 1999)

" I tested one of these devices on my personal 1911, and I was surprised by the easy fit and close tolerances of the device. I am used to aftermarket parts not fitting correctly, but the Magloc is an exception........

The Magloc works as advertised; it is up to the user to decide if it fits his or her needs.
"

Full report on the "Test Report" page

Push Button Trigger Lock

US Patent 6,487,803

This Trigger Lock is one of the two that passed the test out of 75 gun locks tested by the US Consumer Products Safety Commission in 2001.

Quick release in total darkness

Can be mounted on wall or drawer

No batteries or keys required

Factory pre-set to either open on A or B position

A- switch
US$23.50

Out of stock - available again on March 15, 2017

=======================

B-switch
US$23.50

Out of stock - available again on March 15, 2017 Available now on Amazon.com (seller: Magloc)

 

Cable tie for Push Button Trigger Lock

Cable tie comes in three different length to suit individual needs.

20"
US$4.50

Out of stock - available again on March 15, 2017

=======================
36" 
US$6.00

Out of stock - available again on March 15, 2017

=======================

60"
US$7.50

Out of stock - available again on March 15, 2017
 

Shipping & Handling for United States & Canada (shipping time takes 4 to 7 business days)

Purchase less than US$50                                      US$7.50
Purchase Between US$50 to $149.99                  US$12.00 
Purchase Between US$150 to $249.99                US$22.00
Purchase Between US$250 to $349.99                US$28.00

For purchase outside of North America, please email us at: info@smartlock.com for exact cost

Some feedbacks from our customers:

June 2, 2006

These Glock mag release's r the best, I use them & I'm 6 yr state Champ,  
Jailer - USA

27-Dec-05

Broke my first one during struggle with suspect. Happy to be buying another. You brought my range score up 30 points w/ almost identical results for two of my partners...talk about some strange looks by the range staff. They're figuring it out now though. XXXX County Sheriff's Office, XXXXX, Washington. Wanted to say thanks for your fine product. 
JD – WA

Form a customer who purchased a Glock duty recoil control thumb rest & extended mag release

January 30, 2006

THESE ITEMS HELP ME TO WIN THE COMPETITION IN PUERTO RICO.THANK YOU.
A V- Ponce, PR

 

Our Recoil Control Thumb Rest for Glock pistols is #12 of the most inquired
products featured in Law Enforcement Products News in 2003 published in
January. February 2004 issue.

**Many peace officers around the world are now using our Recoil Control Thumb Rest & EasyFit MagWell on their Glock pistols.**



 



Back to Front Page of
Smart Lock Technology Inc.