MAGLOC®
EasyFit MagWell for Springfield XD/HS 2000 in 9mm and .40 S&W
**The
first magwell available on the market for this pistol**
(Does not fit some XD models made after March 2005 that has blockage inside the handle hole unless the blockage is trimmed off.)


For 9mm & .40 S&W Price: US $27.00
Does not fit compact our sub-compact models

For .45 ACP  Price: US $29.50  Does not fit compact our sub-compact models

Features:

1. Increase the existing magazine well opening by 45%.

2.  Protect the magazine well opening from wear & tear.

3.  Holes can easily be drilled for the attachment of lanyard.

4.  Lightweight and tight fit for daily carry or competition.

Specification:

1.  Fits Springfield XD/HS 2000 models: 4" Service Model   & 5" Tactical Model in 9mm and .40 S&W cal. (does not fit XD in 45ACP cal. )
(Does not fit some XD models made after March 2005 that has blockage inside the handle hole
unless the blockage is trimmed off.)
2. 
Made of glass fill nylon - durable and long lasting
3. 
Weight:     0.34 oz (9.6 g ram)
4.  Maximum outside width: 1.47" (37.5mm)
5.  Inside width: 1.44"(36.6mm)
6.  Original inside width of gun of handle: 0.98"(24.8mm)
**
Increases original magazine well opening by 0.46" (11.8mm) - 47%
(Note: different shooting sports have different limitation on firearms modification, please consult with the proper authority.)



Installation:
Warning - always wear eye protection if assembly or disassembly of firearms is required.  Make sure the gun is not loaded before starting the following process.
If you are not comfortable with the installation procedures described below, please have the work done by a qualified gunsmith.

1.  Unscrew the attached screw.
2.  Slide the magwell into the handle hole of the firearm. 
3.  Check and see if the MagWell is tight fit with the handle.
4.  Insert an empty magazine for fitting test
5.  To prevent accidental loss, you can attach the MagWell onto the handle
     with the attached screw.

***************************************

MAGLOC®
EasyFit MagWell for Springfield XD/HS 2000 in .45 ACP cal.
Does not fit compact our sub-compact models

Specification:

1.  Fits Springfield XD/HS 2000 models: 4" Service Model   & 5" Tactical Model in .45ACP cal.
2. 
Made of glass fill nylon - durable and long lasting
3. 
Weight:     0.34 oz (9.6 g ram)
4.  Maximum outside width: 1.53" (39.0mm)
5.  Inside width: 1.46"(37.2mm)
6.  Original inside width of gun of handle: 1.06"(26.9mm)
**
Increases original magazine well opening by 0.40" (10.3mm) - 38%
(Note: different shooting sports have different limitation on firearms modification, please consult with the proper authority.)

 

Some feedbacks from our customers:

Great fitting product and quick shipping. Thanks. AAAAA++++++
Michael M. OH

Great product, great experience, fast delivery. Thanks!
Allan S. NC

Back to:Products-banner.jpg

 

Back to Front Page of
Smart Lock Technology Inc.